General Scientific Product

Biocoction Manufacturing Private Limited - Offering Powder Coated Horizontal Mushroom - Laminar Air Flow- MS-SS,

Inner chamber -SS, Complete with -HEPA Filter, Pre Filter, Blower, Pressure manometer, Gas cock, Front door is acrylic. Built in UV Tube, FL light.There are 2 types of Vertical Laminar air flow we have depending of the raw materials use in the body .

Outer Body- CRCA Sheetepoxy Powder coated antibacterial& Antirust effect, 22 gauge ORStainless Steel-304PVC /Matt grit/ Sattin finish, 22 GAUGE Work table top:-SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE Front door and side covered with UV protected 5 mm Acrylic sheet to protect customer from UV Exposure complete transparent. Permanent magnet to hold Air flow type: - Horizontal Air flow from the front. Air Flow Velocity:- 90 FPM 20%, Inflow Velocity: 0.53 m/s,Down flow Velocity: 0.33m/s Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, hp. Noise of the a blower is less than 55 dBA& Very low vibration

Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable. HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, imported micro-fine glass fiber media; conforms to EU 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.

Work table top:-SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE Front door and side covered with UV protected 5 mm Acrylic sheet to protect customer from UV Exposure complete transparent. Permanent magnet to hold Air flow type: - Horizontal Air flow from the front. Air Flow Velocity:- 90 FPM 20%, Inflow Velocity: 0.53 m/s,Down flow Velocity: 0.33m/s Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, hp. Noise of the blower is less than 55 dBA & Very low vibration Filtration Assembly: - Room air is drawn from the bottom of the cabinet through a Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area. Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh onair leaving side; conforms to EU4 / G-4 Grade, with the efficiency of down to 10microns. These filters can be cleaned by compressed air & also washable. HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, importedmicro-fine glass fiber media; conforms to EU 14 Grade, with an efficiency rating better than 99.999% for 0.3 These filters are designed to accommodate higher air flovolume. Perforated diffuser screen /shield mesh guard protect Filters from damage. Front angular 10 degree slope helps reduce fatigue of user. Pressure manometer to track filter pressure & air/gas cock inside the working area Top removable panel for easy access to electrical fittings and easy removable filter

Double wall system, Outer MS- Powder coated and Inner Stainless steel-304 or Inner and Outer Both SS- 304. Electro-polished Stainless steel 304 of 20-gauge sheet of JSW. Between two walls are filled with Glass wool insulation.

Work table top:- SS-304, PVC /Matt grit/ Satin finish, 22 GAUGE