0
home

Heavy Instruments

home
Showing 14 Items
  1. Shaker Incubator Without Shelf

      1. CFL Lamps inside the chamber for proper illumination to view the samples. 2. Control Panel Comprises of Temperature +Timer controller along with RPM meter. 3. RPM 20250 RPM (RPM Can fluctuate depending in voltage) along with suitable universal clamps. 4. Temperature Range - Ambient+5C to 60 C, Accuracy - 1C, Resolution 0.1C and PT-100 Sensor inside the chamber , Solid state relay. Audible / visible alarm for over temperature.
      Send Inquiry
    • Automatic Chiller

        device used to lower the temperature Most chillers use refrigerant in a closed loop system to facilitate heat exchange from water where the refrigerant is then pumped to a location where the waste heat is transferred to the atmosphere.
        Send Inquiry
      • Humidity Chamber

          Indirect heating system is provided, comprising of air heaters of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity. 8. An energy efficient cooling unit CFC Free compressor is installed Emerson Copeland Product. 9. Inside the chamber water reservoir is there with a immersion heater. An in-built water level cut off system is inside the water reservoir to maintain proper water level. Water level cut off system is connected with a valve inside control panel when low water the valve opens and when water is filled valve get closed. So, the water level is maintained perfectly- (Water level controller need to be cleaned on regular basis so that it works perfectly or else chances of overflow is there) 10.CFL Lamps inside the chamber for proper illumination to view the samples.
          Send Inquiry
        • Plant Growth Chamber

            1. Two Door systems Outer body/door is MS- powder coated with 5 mm thick acrylic window to view inside. Magnetic door closer with gasket. Inner thick transparent acrylic/Plexi glass to view the specimen without disturbing the inner samples. 2. Inside air circulation fan to maintain uniform temperature of the chamber. 3. Indirect heating system is provided, comprising of air heaters of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity. 4. An energy efficient cooling unit CFC Free compressor is installed Emerson Copeland Product. 5. Inside the chamber water reservoir is there with a immersion heater. An in-built water level cut off system is inside the water reservoir to maintain proper water level. Water level cut off system is connected with a valve inside control panel when low water the valve opens and when water is filled valve get closed. So, the water level is maintained perfectly- (Water level controller need to be cleaned on regular basis so that it works perfectly or else chances of overflow is there) 6. CFL Lamps inside the chamber for proper illumination to view the samples. 7. Control Panel Comprises of Temperature +Humidity controller + Light Controller. Temperature and humidity is interconnected and dependent on each other. 8. Inside 4-16 nos of light present. Light controllers have 25%, 50%, 75% and 100%. Light Controller controls the no of lights to be run and the desired time. Timer for light is inbuilt in the light controller segmented in 24 hours CAN BE SET AS PER NEED.
            Send Inquiry
          • Locker Cabinet

              Industrial Locker Cabinet
              Send Inquiry
            • Industrial Locker Cabinet

                1. Ergonomic design for versatile usage eases of use, plug & play system 2. Designed so as to meet the requirements of US Federal Standard 209 B(BS5295) providing particle free air to meet class 100 conditions 3. International Standards - UK Complied Certifications ISO 9001:2015, CE. GMP Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name. Internal IQ/ OQ / PQ Certification
                Send Inquiry
              • Laboratory Chemical Fume Hood

                  Specification :-Outer Body Ms-powder coated or SS Inner body PP Sheet for chmical resistance Inner body with 3-4 inlets for air, water, gas or vacuum, All PP( polypropylene) . Extra Water nozzle- PP, SS Basin Front left side panel with regulator for water, gas, air or vacuum Left panel with 1/4 electrical connections Digital controller :-Microprocessor based PID Controller for blower on off , blower timer, blower speed contrll, Fl light On off Lower base storage cabinet with 2-4 cabinets Working top black granite, front arm rest complete SS-304 ,22 GAUGE. Size(ft.) A. 3x2x2 ft. B. 4x2x2 ft. C . 5x2.5x2.5 ft.
                  Send Inquiry
                • 96 Tray Dryer

                    TRAY DRYER INDUSTRIAL SCALE FOR DRYING ALL TYPES OF SAMPLES
                    Send Inquiry
                  • 24 Tray Dryer

                      Tray dryer with 24 trays , 6 nos of individual fans to control the temperature.
                      Send Inquiry
                    • 12 Tray Dryer

                        12 TRAY DRYER WIT 3 NOS INDIVIDUAL FANS TO CIRCUALTE THE AIR AND PROPER DRYING
                        Send Inquiry
                      • Powder Coating Plant

                          We are doing powder coating for our customers
                          Send Inquiry
                        • Tray Dryer With Feeder

                            Double walls System, between two walls are filled with glass wool insulation 3-5 inch.
                            Send Inquiry
                          Contact Us

                          101/1/7, Jessore Road North, Madhyamgram, North Twenty Four Parganas, Madhyamgram, West Bengal, 700129, India
                          Phone :+918045476736